FRONT BUMPER TAB REPAIR KIT - ALFA ROMEO GIULIA 2.0 & QV

Broken mounting tabs usually mean expensive replacements. Our 3D-printed repair brackets offer a smarter, stronger alternative. Utilizing a Carbon Fiber/Nylon composite, these brackets provide the perfect balance of "flex" and "firmness" required for automotive bodywork.

Comes as a set of two (Left + Right) brackets. 

Designed and manufactured in House (NYC USA)

Fitment: 

• Alfa Romeo Giulia 2.0 and Quadrifoglio 

Adhesive Recommendation:

• J-B Weld Plastic Bonder 50139 
• Permatex Super Weatherstrip Adhesive 81852

***Installation Guide***

Professional Installation is Highly Advised 

1. ​Cut off the broken tab as close to the bumper as possible. 
2. ​Sand the area where the bumper repair tab will be glued until even and smooth. 
3. ​Clean the area using a microfiber towel and rubbing alcohol.
4. ​Add a strip of automotive masking tape over the face of the bracket attached to the fender (this prevents glue/epoxy from curing directly onto the fender bracket).
5. Insert the replacement bumper tab directly into the fender bracket. This step ensures perfect tab alignment with the bumper before gluing.
6. ​Apply a medium to heavy coat of glue or epoxy onto the outward-facing side of the replacement tab. 
7. ​Align the bumper with the fender and press it firmly against the wet epoxy so the tab bonds to the inside of the bumper in the exact position needed.
8. ​Use automotive masking tape to hold the bumper in place until the epoxy/glue cures.
9. ​Allow 24 hours without exposure to moisture to ensure the glue/epoxy fully cures.
10. ​Remove the automotive masking tape after 24 hours.